Er zijn 7 resultaten gevonden

door EVriderDK
02 mar 2023, 19:07
Forum: Stromer ST1 X | ST2 | ST2 S (2015 - 2020)
Onderwerp: Error E210205, W210281, W210284 after chain and cassette replacement. ST2 2016
Reacties: 1
Weergaves: 455

Error E210205, W210281, W210284 after chain and cassette replacement. ST2 2016

Hi all. I got the first error code when braking. The bike could run, but not regen. It gave the hall sensor error every time. I cleaned the plug and remounted. All was okay for 20 km. but then when using the BOOST mode I started pedalling at the same time and the the assist dissappeard and I got the...
door EVriderDK
07 jun 2022, 21:15
Forum: Stromer ST1 X | ST2 | ST2 S (2015 - 2020)
Onderwerp: Torque sensor going to 0 volts sometimes ?
Reacties: 11
Weergaves: 675

Re: Torque sensor going to 0 volts sometimes ?

UPDATE:

I fixed it.

Just removed the sensor itself and cleaned out the torque sensor plate and because it was dirty and was sometimes blocking and sticking and then refittet the sensor and adjusted it and calibrated it.
door EVriderDK
06 jun 2022, 18:36
Forum: Stromer ST1 X | ST2 | ST2 S (2015 - 2020)
Onderwerp: Torque sensor going to 0 volts sometimes ?
Reacties: 11
Weergaves: 675

Re: Torque sensor going to 0 volts sometimes ?

Golvas schreef: 04 jun 2022, 18:32 Cable issue, bad connection sensor / OMNI, the sensor itself ...
Thank you!

I will check for water.
Will see if I can buy a new sensor if I cannot fix it :)
door EVriderDK
04 jun 2022, 09:52
Forum: Stromer ST1 X | ST2 | ST2 S (2015 - 2020)
Onderwerp: Torque sensor going to 0 volts sometimes ?
Reacties: 11
Weergaves: 675

Torque sensor going to 0 volts sometimes ?

My Torque sensor has started to go to 0 Volts for a few seconds and then back to normal again, so the assist stops and comes back on. Sometimes it does it for just a few seconds and other times it can last longer. Anyone who knows exactly why it does this ? I had the problem before. Then i dismantle...
door EVriderDK
29 sep 2021, 20:34
Forum: Stromer techniek
Onderwerp: Omni Always-On Hack ? Theft protection.
Reacties: 11
Weergaves: 2813

Re: Omni Always-On Hack ? Theft protection.

Is there no possibility to keep the aux-battery connected with the main-battery, so it will keep charged, and only will be drawn when the main-battery is removed? That will mean that the removal of the main-battery will keep the anti-theft and tracking active fo a while. Yes you could use the USB c...
door EVriderDK
29 sep 2021, 08:34
Forum: Stromer techniek
Onderwerp: Omni Always-On Hack ? Theft protection.
Reacties: 11
Weergaves: 2813

Re: Omni Always-On Hack ? Theft protection.

Hi both.

I will make sure that controller etc does not switch on, so it should not use that much power I think ?
Controller is powered from the main battery normally.
Only the mainboard should have power.
door EVriderDK
28 sep 2021, 22:55
Forum: Stromer techniek
Onderwerp: Omni Always-On Hack ? Theft protection.
Reacties: 11
Weergaves: 2813

Omni Always-On Hack ? Theft protection.

So, the theft protection of these bike are completely useless as you can just remove the battery = No connection/tracking. So I was thinking about putting a AUX battery or power bank that would power the Omni only, Also after removing the battery. Ideally: 1. Main board is powered on always, But cou...